Aiphone AXW-AVT Configuration Diagram, AX-DMor IE/IF-Series Audio Door Station, Axw-Avt, Ax-Dv

CONFIGURATION DIAGRAM:

AXW-AVT with Axis 243SA Video Server (Standalone Only)

Axis 243SA Application Considerations:

AX-DM or IE/IF-Series

Audio Door Station

AXW-AVT

24V	PS-2420UL
+			+
-		-
RELAY			Normally Open contact for remote device activation
NO
NO			(i.e. video switcher, DVR, etc.)
SENSOR			Normally Closed input for remote activation
NC
NC			(i.e. motion sensor, loop detector, etc.)

The Axis 243SA can only be used in ‘Standalone’ configuration (i.e., utilizing a PC as a master station).

When used in standalone configuration, Aiphone recommends Controlware’s VIPDoorControl software. For further details, see http://www.vipdoorcontrol.com.

Consult the Axis 243SA Installation and User manuals for further information pertaining to video server installation and configuration.

		CALL IN
		+
		-
CCTV Camera		CALL OUT
		+
75 Ohm, 1V Peak-to-peak		-
(Independently powered)		AUDIO IN
		+
		-
	*	AUDIO OUT
		+
		-										NETWORK	RS-232
		POWER	1	2	3	4	5	6	7	8	9	10 11 12
AX-DV		DOOR
		CAT-5e
		VIDEO IN

Coax	Coaxial Video Cable
VIDEO OUT		To Axis-supplied
		power source
Configuration Notes:		To Network

1.AX-series video door station connects to ‘DOOR’ input of AXW-AVT. Ensure that the “CCTV / DOOR’ switch on the AXW-AVT is in the ‘DOOR’ position.

*2. Alternatively, an IE/IF-series or AX-DM audio door may be used, along
with 3rd party CCTV camera. Connect audio door station to ‘Door’ input
(following the wiring method shown in the AX-series installation manual,	LINE/MIC	LINE			Video Server
pg. 12). Connect the camera to ‘Video In’ and put the ‘CCTV / DOOR’
			VIDEO		AXIS 243SA
switch in the ‘CCTV’ position.	IN	OUT		1	2 3 4
			IN OUT	75Ω ON
					STATUS

3. Connect the Call In / Call Out and Audio In / Audio Out connections on	NETWORK	POWER
the AXW-AVT to the Axis 243SA connectors, as shown.

4. Configure AXW-AVT internal jumpers as necessary (see Pg. 21).

Axis 243SA (Back View)

Axis 243SA (Front View)

Please Note:

Only information pertaining to the connection and operation of the AXW-AVT / AXW-AVR and listed 3rd party devices interfacing with it are included here. Aiphone is not responsible for attempts to connect the AXW-AVT / AXW-AVR to untested 3rd party transmission hardware. Consult the installation manual for the 3rd party device being utilized

	for further information regarding physical mounting, base functionality, power requirements,	etc. For the most up-to-date compatibility information, please consult http://
	www.aiphone.com or contact Aiphone Technical Support.
	For complete AX system installation, wiring, and programming information, please consult the AX Installation Manual (included on CD with AX Central Exchange Unit, or
Pg. 2	available at http://www.aiphone.com).	Pg. 3