GH-CCTV
CCTV Interface Module for GH-MK Concierge Station
- INSTRUCTIONS -
The GH-CCTV is a video adaptor that provides a connection for an external CCTV camera associated with the GH-MK concierge unit. When the GH-MK calls the tenant, the tenant will be able to view the CCTV camera’s image on their monitor. The GH-MK must initiate the GH-CCTV before the video image can be sent to the tenant.
WIRING DIAGRAM:
CCTV Camera
Coax
Power
Supply
GH-CCTV
Terminal Board
GH-MK*
GH-1KD
| | | | |
| PS24 | | | |
| | | |
* GH-MK must be modified for Service Button | |
PS24 | : Power Supply PS-2420UL |
And requires additional connector cable. | | |
Connector cable P/N: 238400 | | |
Service Switch P/N: 281450 | | |
GH-CCTV CONFIGURATION:
1.Each GH-CCTV adaptor will act as one entrance panel in your GH system. Take this into account when designing your system. The GH-CCTV is default to entrance panel #1.
2.Open the GH-CCTV case to access the GH-DA/A module inside. Put this audio module in programming mode and assign the first button of the GH-SW to call the GH-MK.
OPERATION:
1.Press the Service button on the GH-MK to call the GH-CCTV. The GH-MK will then ring and display a call from entrance 1 (assuming default setting).
2.Pick up the GH-MK handset to answer the call from the GH-CCTV. Scroll to the entry of the tenant the visitor wishes to contact and press the bell button.
3.The GH-1KD will receive the call and audio from the GH-MK and the video image from the camera attached to the GH-CCTV.
| Aiphone Communication Systems | | |
| 1700 130th Ave. N.E. | TOLL FREE TECHNICAL SUPPORT: | |
| Bellevue, WA 98005 | |
| (800) 692-0200 | |
| (425) 455-0510 | GH-CCTV Instr. |
| E-MAIL: tech@aiphone.com |
| FAX (425) 455-0071 | 0908JD |
| |
