Aiphone JF-DVF-XP 2

2 MOUNTING & INSTALLATION

Pg. 2

Installation Location:

Care should be taken when choosing the best

location for mounting the JF-DVF-XP. Do not

install the video door station in any areas

subject to direct sunlight or other strong direct

lighting conditions; installation in such

locations may cause reduced visibility and/or

video quality while viewing from the master

station.

Mounting Height & Viewing Angle:

Because the JF-DVF-XP contains a fixed-angle camera element, mounting height and

placement relative to the entry should be taken into consideration. The recommended mounting

height and corresponding viewing angle are depicted below.

Physical Mounting Instructions:

1. JF-DVF-XP – provide wall surface opening for rough-in

backbox (supplied), using dimensions shown (Fig. 1).

Note: if surface mount is required, use the Aiphone

SBX-DVF-P (sold separately) .

2. Connect the 2 conductor wire to

terminals A1 and A2 on back of unit.

3. JF-DVF-XP – Secure the door station to

the backbox using the included security

screws / driver (Fig. 1).

8-7/16"

1-25/32"

4-1/2"

Figure 1

2'1"

20"

JF-DVF-XP

3'11"

6'1"

20"

3'1"

JF-DVF-XP