![](/images/new-backgrounds/1307156/3071563x1.webp)
OPERATIONS
Activation of the camera from a Monitor:
1.The CCTV camera can be viewed on any of the KC monitors in the system by pressing the MONITOR button. When the video is activated, the audio door station will be activated to transmit audio to the monitor station. To initiate
2.To turn the monitor off, press the MONITOR button again. Otherwise, it will automatically time out after approximately 30 seconds.
Activation of a camera by the Audio Door Station:
1.When the call button is pressed on the
2.Pick up the handset to answer, and hang up to conclude. Conversation will automatically turn off in approximately
Interfacing Video with Other Systems:
1.VIDEO OUT connection simply passes the composite video signal on to a standard CCTV system, such as a monitor, input on a switcher, or DVR. This video signal is live as long as the camera is powered. When using this feature, set the 75 OHM switch to the OFF position.
2.RELAY connection provides a normally open contact closure that can be connected to an external system. This contact will be closed whenever the Aiphone system is turned on. This can be wired into a record input on a DVR or any other external device that needs to be notified when the video and audio is activated to the Aiphone monitor.
SPECIFICATIONS: |
|
Power: | Supplied by KC Monitor |
Video Input & Output: | Composite 1V |
Connector: | BNC |
Audio Door input: | Use |
Relay: | Normally open output |
Wire: | 18AWG, |
Wiring distance: | Max. 330 from |
Dimensions: |
FCC Class B Verification
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
— Reorient or locate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note:
Only information pertaining to the connection and operation of the
Aiphone Communication Systems | Toll Free Technical Support: |
| |
1700 130th Ave. N.E. |
| ||
Pg. 2 | |||
Bellevue, WA 98005 | |||
(425) | FAX: | ||
FAX (425) | 1206JDJS |