Aiphone LE-SSV Le-Ssvback View, Specifications, Toll Free Technical Support, video output, Black

LE-SSV BACK VIEW:

Color Camera

Call Button

Red connector for 12V DC camera power input (from included power supply) Power supply dimensions:

1-⅝" W x 2-¼” H x 1-⅝” D 6' DC cord.

			Yellow BNC connector for
			video output
		Speaker
Red:	# terminal of Master		NOTE: If using fiber optic interface, the video input on
Black:	E of Master		the IFS VIC-5211 is not compatible with the LE-SSV
Blue: - (Neg.) of Master			camera. The VIC-5211 can be used for audio only,
			with a separate fiber module required for video.

Intercom wiring must be run at least 20" away from any AC wiring, fluorescent lighting, dimmer switches, or any other electronic device that may cause interference.

SPECIFICATIONS:

Audio Power Source:	Supplied by master station
Speaker:	20 ohms, 4W, 2" diameter, water proof and puncture resistant, 2.4 oz. magnet
Call Button:	SPST call button, momentary activation. Limited stop button
Call Annunciation:	Call tone rings at master as long as button is held down. LED will remain lit for approx.
	20 seconds (LEF, LEM-3, MP-3S, AP-5/10M only). Call tone only on LEM-1DL, LEM-1, and MP-1S.
Communication:	Hands free at sub. Master is push-to-talk, release-to-listen.
CCTV Camera Output:	75 Ohm, 1Vp-p, NTSC, DC-coupled
Iris Control:	Auto
Minimum Illumination:	1.0 lux
Camera image sensor:	1/3" CCD
Focal Length:	4.3mm Cone Pinhole Lens (78°)
Effective Pixels:	510(H) x 492(V) NTSC
Camera Power Source:	12V DC, 100mA (via included power supply)
MTBF:	(Mean Time Before Failure) 80,000 Hours
Faceplate:	12 gauge stainless steel
Mounting:	Flush mount into a 2-gang box (minimum 2-½” depth) or surface mount into SBX-2G (sold separately)
	Tamper proof screws included (6x32 for use with flush 2-gang box) with T-10 TORX bit
	When using SBX-2G, use the hardware included with that unit.
Terminations:	Color-coded prewired pigtails. Red wire = “1"; Black wire = “E”; Blue wire = negative;
	Red connector = 12VDC power; Yellow connector = 75 Ohm / 1Vp-p video output (BNC).
Operating Temperature:	14 F ~ 140°F (-10°C ~ 60°C)
Audio Wiring:	2 conductors in a 1-master LEF, MP-S, or AP-M system. 3 conductors in a multi-master LEF system.
	Shielded cable is recommended. Use Aiphone #822202 for LEM or MP-S. Use #822202 or
	#822203 for LEF. Use #832202 for AP-M systems.
Audio Wiring Distance:	See system that unit is being used with for distance specifications.
Video Wiring:	Independent BNC connection from substation pigtail to destination video device.
Dimensions (H x W x D):	LE-SSV alone:	4-11/16" x 4-11/16" x 2"
	With SBX-2G:	4-3/4" x 4-7/8" x 3-5/8" (Top) 2-3/8" (Bottom)

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425)455-0510 FAX (425) 455-0071

Toll Free Technical Support:

1-800-692-0200

E-mail tech@aiphone.com

LE-SSV Instr. 1011JD