MODELO 9224

MODEL 9224

ARMADO DEL PEDESTAL (Figura 1)

1.Retire todos los contenidos de la caja.

2.Coloque el ventilador horizontalmente sobre el piso, con el Motor orientado hacia el techo. Procure que el Panel de Control en la parte superior del motor dé hacia delante. Oriente las mitades del pedestal como se indica e instale (1) 1/4-20 X 1” Perno a través del orificio superior del pedestal en ambas mitades del mismo. Coloque un Espaciador de Hule entre las mitades del pedestal y la ménsula oscilante de la parrilla posterior hacia la izquierda del motor. (Inserte A) Apriete el perno hasta dejarlo firme.

3.PROCURE QUE LA AGARRADERA DÉ HACIA FUERA Y SE ENCUENTRE SOBRE EL COSTADO DERECHO DEL MOTOR. Mientras sostiene la Agarradera en la posición que se indica, instale (1) Perno de 1/4-20 X 1” a través de la Agarradera y las mitades del pedestal superior. Coloque un espaciador de hule entre las mitades del pedestal y la ménsula oscilante de la parrilla posterior hacia la derecha del motor. (Inserte B) Apriete el perno hasta dejarlo firme.

4.Instale (1) Perno de 1/4-20 X 1", (1) Tuerca Hexagonal de 1/4-20 y (1) arandela fijadora de 1/4" en los orificios inferiores restantes en cada costado del Ventilado.

Espaciador de

Figura 1

 

Hule

 

Inserte 1A

Caja de

Control

Espaciador de

Hule

Inserte 1B

ARMADO DE RUEDAS (Figura 2)

ARME COMPLETAMENTE EL PEDESTAL ANTES DE INSTALAR EL CONJUNTO DE RUEDAS

1.Coloque la Ménsula de Montaje en la parte inferior de las mitades del pedestal, a la izquierda del motor, como se indica.

2.Instale dos tornillos #8 X 7/16 a través de la parte inferior del pedestal, usando un Destornillador de Cabeza Phillips #2.

3.Deslice el Barra de Eje a través de la Ménsula de Montaje.

4.Instale las dos ruedas en el Barra de Eje y fíjelas con dos Tuercas Ciegas de Eje. Apriete Tuerca Ciega de Eje en la Barra de Eje.

Tuerca Ciega

Figura 2

de Eje

 

Rueda

 

Barra de Eje

 

Ménsula de

Montaje

Tornillos

#8 X 7/16”

Rueda

Tuerca Ciega

de Eje

FUNCIONAMIENTO

1.Enchufe el ventilador a un tomacorriente para tres púas, con tierra, de 120V CA.

2.Usando el interruptor rotatorio, fije la velocidad deseada del ventilador (0) Apagado, (3) Alta, (2) Media, (1) Baja.

3.Para Ajustar el Ángulo del Cabezal: El cabezal permanecerá estacionario cuando se le hace girar a la posición deseada. Podría requerirse en ocasiones apretar los herrajes del pivote después de reposicionar el cabezal varias veces.

MANTENIMIENTO

ADVERTENCIA: SIEMBRE DESENCHUFE EL CABLE ANTES DE MOVER O PROPORCIONAR SERVICIO AL VENTILADOR.

ADVERTENCIA: ¡NO SUMERJA EL VENTILADOR EN EL AGUA!

LIMPIEZA: Utilice un paño suave humedecido con una solución jabonosa liviana, tal como un detergente líquido para lavar platos. Seque TODAS LAS PARTES POR COMPLETO antes de rearmar. Después de dar mantenimiento o servicio, REARME POR COMPLETO la unidad en la forma descrita en este manual de instrucciones, antes de volver a conectarla a la fuente de poder.

LIMITED WARRANTY

AIRKING THREE-YEAR LIMITED WARRANTY. Products are warranted by AirKing to the original user against defects in workmanship or materials under normal use for three years on the motor and one year on all other parts, after date of purchase. Any part which is determined by AirKing to be detective in material or workmanship and returned to an authorized service location, as AirKing designates, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced at AirKing’s option. For limited warranty claim procedures, see PROMPT DISPOSITION below. This limited warranty gives purchasers specific legal rights which vary from state to state.

LIMITATION OF LIABILITY. To the extent allowable under applicable law. AirKing’s liability for consequential and incidental damages is expressly disclaimed. AirKing’s liability in all events is limited to, and shall not exceed, the purchase price.

WARRANTY DISCLAIMER. AirKing has made a diligent effort to illustrate and describe the products in this literature accurately; however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty the products are merchantable, or fit a particular purpose, or that the products will necessarily conform to the illustrations or descriptions. Except as provided below, no warranty or affirmation of fact, expressed or implied, other than as stated in “LIMITED WARRANTY” above is made or authorized by AirKing.

PRODUCT SUITABILITY. Many states and locations have codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While AirKing attempts to assure

ADVERTENCIA: No use gasolina, bencina, acetona, limpiadores abrasivos, etc., puesto que dañarán el Ventilador. NUNCA use ALCOHOL O SOLVENTES.

SERVICIO: Todos los demás servicios, con la excepción de mantenimiento general por parte del usuario, deberán ser realizados por un representante de servicio autorizado.

LUBRICACIÓN: Los cojinetes de precisión vienen sellados de por vida en la fábrica y no precisarán ninguna lubricación adicional.

ALMACENAMIENTO: Guarde el Ventilador con estas instrucciones en un lugar fresco y seco.

Rev. J 9/06

6

5084028

that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a product, please review the product application, and national and local codes and regulations, and be sure that the product, installation, and use will comply with them.

Certain aspects of disclaimers are not applicable to consumer products; e.g., (a) some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you; (b) also, some states do not allow limitations on how long an implied warranty lasts, consequently the above limitation may not apply to you; and (c) by law, during the period of the Limited Warranty, and implied warranties of merchantability or fitness for a particular purpose applicable to consumer products purchased by consumers, may not be excluded or otherwise disclaimed.

PROMPT DISPOSITION. AirKing will make a good faith effort for prompt correction or other adjustment with respect to any product which proves to be defective within limited warranty. For any product believed to be defective within limited warranty, first write or call dealer from whom product was purchased. Dealer will give additional directions.

Rev. J 9/06

3

5084028

Page 3
Image 3
Air King 9224 specifications Armado DEL Pedestal Figura, Armado DE Ruedas Figura, Funcionamiento, Mantenimiento

9224 specifications

The Air King 9224 is a powerful and efficient ventilation solution designed for various indoor spaces. Known for its durability and robust performance, this model is ideal for anyone seeking to improve air circulation effectively.

One of the standout features of the Air King 9224 is its impressive airflow capacity. It is equipped with a powerful motor that delivers a CFM (Cubic Feet per Minute) of 270, making it highly effective for large spaces, such as warehouses, workshops, and commercial environments. This makes it an excellent choice for those needing significant air movement to combat heat and humidity.

The Air King 9224 comes with a variety of speed settings, allowing users to customize the airflow according to their needs. With three-speed options, you can easily adjust the fan speed to provide a gentle breeze or a stronger airflow depending on the temperature and humidity levels in the environment. The flexibility of speed settings ensures optimal comfort for users.

Another key characteristic of the Air King 9224 is its construction. Made from high-quality materials, the fan is built to withstand rigorous use. The heavy-duty, all-metal construction not only provides durability but also enhances the fan's stability during operation. Additionally, the fan's design incorporates safeguards to reduce noise levels, ensuring a quieter operation without sacrificing performance.

For those concerned about energy efficiency, the Air King 9224 is designed with energy-saving technologies that help lower electricity costs while maintaining strong airflow. This makes it a cost-effective option for commercial properties.

The Air King 9224 also features versatile mounting options, as it can be mounted on walls or ceilings. This flexibility allows users to position the fan in an optimal location for maximum air circulation, making it suitable for various settings, including garages and manufacturing areas.

In conclusion, the Air King 9224 is a versatile and high-performance ventilation solution characterized by its powerful motor, adjustable speeds, durable all-metal construction, energy efficiency, and flexible mounting options. These attributes make it an excellent investment for anyone looking to enhance air circulation in medium to large indoor spaces while ensuring comfort and productivity.