14
TIME LOG Key
To set up the instrument so it automati-
cally takes measurements, use the TIME
LOG key. This allows you to program a
logging time and interval, and the meter
will read and store measurements that
can be viewed later.
Press the TIME LOG key. Use the 5 or
6 keys to select “On”. Press the ENTER
key.
“LOG” will light up on the display and
the logging interval is shown. Use the 5
or 6 keys to scroll through the log
interval choices. The choices are: 5, 6, 7,
8, 9, 10, 15, 20, 25, and 30 seconds (SEC),
and 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25,
30, and 60 minutes (min). Press the
ENTER key to accept your choice.
Next, you will choose the number of
readings that you want the instrument
to take. The choices are “COnt” or 1 to
9999. Use the 5 or 6 keys to scroll
through the choices, and press ENTER
to accept your choice. If “COnt” is cho-