PRECAUTIONS

•Do NOT install the unit in a location where it may be subjected to:

—Direct sunlight or other sources of excessive heat

—Fluid, rain or moisture

—Excessive dirt or dust

—Excessive vibration

•This unit is designed to be operated on a 12-volt DC negative-ground electrical system only.

•Choose the mounting location carefully so that the unit will not interfere with normal driving functions.

•Before making connections, disconnect the ( terminal of the car battery to avoid short circuiting.

Notes on CDs

•A defective or soiled disc stored in the disc magazine can cause the sound to drop out during play.

•Always handle a disc by holding its inner and outer edges.

•Do NOT touch the surface of the unlabeled side of the disc.

•Do NOT attach paper or tape etc. to a disc.

•Clean the discs before inserting them into the disc magazine. Always clean a disc from the center outward with a cleaning cloth.

•There may be burrs left on the inner and outer edges of a brand-new disc. The burr may cause the malfunction of the unit or sound drop- out. To prevent these problems, if the burr is left on the disc, be sure to remove them with a ball-point pen, etc. as illustrated.

Ball-point pen

Burr

ENGLISH

 

Burr

Ball-point pen

•Do NOT expose the discs to direct sunlight or excessive heat.

•NEVER use solvents such as benzine or alcohol to clean a disc.

•You cannot play an 8-cm (3-inch) CD — even with the specially designed adaptor.

•Do NOT use irregular shape CDs (example: heart-shaped, octagonal ones).

It may result in malfunction.

Notes on the disc magazine

•Do NOT leave the disc magazine in a place subject to excessive temperature or humidity.

•Do NOT insert more than one disc per slot.

•Do NOT drop the disc magazine.

ENGLISH 2