Aiwa AWP-ZX7 Listening to the radio, — Preset Tuning, — Manual Tuning, 15GB, Tuner, Other operations, To set CD power on, To improve tuner reception

Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.

Press TUNING MODE repeatedly until “PRESET” appears in the display.

Other operations

To	Do this
Tune in a station	Follow the procedure described
with a weak signal	in “Manual tuning preset”
	(page 14).

Set another station	Start over from step 2. After
to the existing	step 5, press – or + (or
preset number	TUNING – or + on the unit)
	repeatedly to select the preset
	number you want to store the
	station.

To improve tuner reception

When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on.

1Press FUNCTION repeatedly to switch the function to CD.

2Press ?/1 to turn off the system.

3Press ?/1 while holding x on the unit. “CD POWER OFF” appears.

To set CD power on

Repeat the procedure above and “CD POWER ON” appears.

Notes

•When “CD POWER OFF” is selected, disc access time is increased.

•You cannot change the setting in Power Saving Mode.

To change the AM tuning interval (except for European models)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding M, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode.

Tips

•The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs.

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 14).

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.

2 Press TUNER BAND repeatedly to select “FM” or “AM”.

4 Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset station.

Listening to non-preset radio station

— Manual Tuning

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.

2 Press TUNER BAND repeatedly to select “FM” or “AM”.

4 Press – or + (or TUNING – or + on the unit) repeatedly to tune in the desired station.

Note

When tuner function is selected as the current function and CD is pressed to select CD during “CD POWER OFF”, it may take some time to switch the function (page 15).

continued