1Turn off the unit.
2Press and hold INFO until “PO” flashes in the display.
3Press SEL.
4Set the time you wish the unit to turn on.
•Press TUNEi and turn the Smart Jog to set the hour.
•Press TUNEk and turn the Smart Jog to set the minute.
5Press SEL.
6Press FNC to select the band.
7Press TUNEi, TUNEkor the desired preset station button to select the station.
8Press SEL.
9Set the time you wish the unit to turn off following the same procedure used in step 4.
10Press and hold INFO until the unit turns off, and setting is completed.
When the unit is on, “MY INFO” appears in the display indicating that the unit is standby for a timer. During the
continues to flash.
To cancel the timer standby, press INFO so that “MY INFO” disappears.
Notes
• To check the setting, turn off the unit, then press INFO. |
The unit displays the scheduled |
times with the appropriate radio frequency. |
• The unit automatically starts tuning at the scheduled |
TAPE PLAYBACK
Playing a tape
1Insert a cassette to start playback.
If a cassette is already inserted, press FNC repeatedly to select Tape Play mode to start playback. Playback starts in the direction that the unit played back previously.
Press the following buttons to operate tape transport.
time regardless of the current source mode. When the |
scheduled program is over, the unit automatically |
returns to the former source mode. |
• The timer setting remains in effect when you turn off the |
unit, and even if you detach the front panel from the |
unit. |
• However, if you press FNC to change the source mode |
during |
is canceled. |
To
Eject a cassette*
Change the playback side
Rewind the lower side (j) of the tape
Rewind the upper side (l) of the tape
Stop fast transport and resume playback
Press
z
f and g simultaneously
g
f
f or g lightly**
*When you eject the cassette, the unit switches to the previous mode.
**Do not press for g all the way. Doing so may change the direction of tape transport.
5 ENGLISH
