18
En

Programed Edit Recording

As you program the CD tracks to record, Programed Edit

Recording displays the remaining recording time for each side

of the tape, so you can easily select a set of desired tracks

within the length of your tape.

1
Insert the recordable tape in deck B.
2
Select the CD function and load disc(s).
3
Press SHIFT+EDIT twice on the remote.
"PRGM C-00" is displayed and "PGM" lights up.
4
Press the numbered buttons on the remote to
enter the length of the recordable tape.
10 to 99 minutes can be specified.
•r or t on the remote or MULTI JOG can also
be used to specify tape length.
5
Press DISC DIRECT PLAY 1-3 to select a disc
(only one disc is selectable).
Then, press the numbered buttons on the remote
to select the first track to be recorded on side A.
-To select the 10th track, press 0/10.
-To select the 20th track, press +10, +10 and 0/10.
-To select the 25th track, press +10, +10 and 5.
•DISC SKIP on the remote cannot be used to select a
disc.
6
Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7
Press SHIFT+EDIT on the remote to switch to side
B and select the tracks for the side.
8
Press SHIFT+EDIT on the remote to switch back
Side A
Tab for side A
to side A.
9
Press wREC/REC MUTING to start recording on
side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
10
Press SHIFT+EDIT on the remote to switch to
side B.
11
Turn over the tape, and press wREC/REC
MUTING to start recording on side B.
•Programmed Edit Recording cannot be used with MP3-CDs.
•You cannot program more than 30 tracks. "FULL" is
displayed.
•You cannot program a track with a track number larger than
30.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1Before recording, press SHIFT+EDIT on the remote to select
side A or B.
2Press r or t on the remote repeatedly or turn MULTI
JOG . The track number and program number are displayed
in succession.
To change the program of each side
Press SHIFT+ EDIT on the remote to select side A or B, and
press s to clear the program for the selected side. Then,
select tracks again.
To clear the edit program
Press s twice in stop mode.
To prevent accidental erasure
Remove the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.