10
ENGLISH
1 Insert the installation CD into your
CD-ROM drive.
2 Double-click on the CD-ROM drive
icon to open it.
3 Double-click on the ADPCM
Drivers folder to open it.
4 Double-click on ADPCM Driver to
start installation.
1In the Welcome! dialog box, click
on the Next button to continue
software installation.
2If you wish to change the destination
folder to a folder other than the
default folder shown in the dialog
box, click on the Browse button to
select the folder to which you wish
to copy the ADPCM Driver files.
Now, click on the Next button to
continue installation.
3You can click on the Back button to
reconfigure the installation
information. To continue installation,
click on the Next button to start
copying the necessary files into the
installation folder.
4Wait until the necessary files for the
ADPCM Driver have been copied.
5Now, click on the Finish button.
This completes ADPCM Driver
setup.
6The Uninstall ADPCM Drivers item
will be created on the /Start/
Programs/ADPCM Drivers menu on
the Windows menu bar.
2INSTALLING THE USB

DRIVER

If the USB driver is not installed into your
PC, you cannot download the MP3 files to
the player.
To install the USB driver, connect the
player with the supplied USB cable and
insert the supplied CD-ROM into the CD-
ROM drive of your PC.
1 Click “Next” on the “Add New
Hardware Wizard.”
2 Select “Search for best driver for
your device” clicking the button
of upper side and click “Next”.
3 Check CD-ROM drive and click
“Next”.
4 Click “Next” according to the
message.
5 After installation of the USB driver
for MM-VX200, click “Finish”.
3

INSTALLING THE WAVE

DRIVER (ADPCM Driver)

You do not need to install this ADPCM
Wave Driver if you have already installed
the VX200 Manager software as described
in the above section.
•The ADPCM Driver lets you play WAV
files converted from voice files you have
recorded using built-in microphone of
the player.
•If you wish to send your voice recorded
as WAV files to someone who does not
have an MM-VX200 player, that person
will have to install the ADPCM Wave
Driver as described below.
If you need to install only the ADPCM
Wave Driver, proceed as follows: