PREPARATIONS

Connection

Plug in the AC power cord to the AC power outlet after all other connections are made.

1Connect the front speakers.

Connect the right front speaker to the SPEAKERS R terminals and place it on the right side of the unit. Connect En the left to the SPEAKERS L terminals and place it on the left side.The speaker cords with the white stripes go to

the 0terminals.2Connect the surround speakers (only for NSX- D22)

Connect each surround speaker cord to the SURROUND SPEAKERS R jack or the SURROUND SPEAKERS L jack.

3Connect the supplied antennas.Strip off the insulation of the FM antenna with twisting the cord.

Connect the FM antenna to the FM 75 Ω terminal without the 2 mark and the AM antenna to the AM LOOP terminals.

AM antenna

FM antenna

4Connect the AC power cord to an AC outlet. When the AC power cord is connected to an AC outlet for the first time, DEMO appears on the display.

To deactivate the DEMO, press DEMO/ECO.

•Do not short-circuit the 0and 9speaker cord leads. •Do not leave objects generating magnetism or objects

affected by magnetism near the speakers.

To position the surround speakers (only for NSX-D22) Position the surround speakers behind the listening area to make the most of the surround effect.

AIWA disclaims any responsibility for injury to persons or other accidents caused by not fitting the surround speakers properly or if the place of the installation is not suitable.

4