Aiwa NSX-D70 Timer recording, To cancel the timer, To change the timer setting, To display the timer setting, OFF, display, playback, Press TIMER, 3Prepare the source

To display the timer settingPress TIMER.

The timer-on time, the source and the timer-activated duration are displayed for 6 seconds.

Tip:

Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or awithin 6 seconds after TIMER is pressed, you can enter the timer setting mode and change the setting.

To change the timer settingRe-set the timer again.To cancel the timer

Press TIMER repeatedly until " OFF" is displayed. "5" disappears from the display.

Tip:

Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous setting, or simply use the same setting again.

Timer recording

Timer recording is available only for TUNER and VIDEO/AUX (with an external timer) sources.

1	Press TIMER (SHIFT+TIMER on the remote
	control) repeatedly until "5REC" appears on the
	display.
2	Carry out step 2 to step 5 described in "Timer	En
	playback".

3Prepare the source.To record the radio, select the band and tune in to the desired station.

To record external equipment connected to the VIDEO/ AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

4Insert the recording tape in DECK 2 and then turn the unit off.

Tip:

The display is dimmed while the timer recording is active.

19