
2Prepare the source.
To record CD(s), select the CD function and load disc(s). To record a radio broadcast, tune in to the desired station. To record a tape, insert the source tape in DECK 1 and select the TAPE function (DECK 1).
To record from connected external equipment, select the VIDEO/AUX function and prepare the equipment.
3Press wREC/REC MUTE to start recording. When recording a CD or tape, playback starts automatically.
When recording input from connected equipment, manually start playback of the source.
On the remote control, press REC MODE and then press wREC/REC MUTE within 3 seconds.
•You can also change the source by pressing REC MODE repeatedly before pressing wREC/REC MUTE.
•Volume or tone adjustment does not affect recording.
•"CAN'T REC" is displayed if you attempt to record a tape with the tab broken off.
To stop recordingPress s.
To pause recording (only for TUNER or VIDEO/AUX source)Press a. Press again to resume.
To record a selected set of tracks from a CDProgram the desired tracks (see "Programmed playback") and then press wREC/REC MUTE.
To record a1Press wREC/REC MUTE during recording or in recording pause mode.
"REC" flashes on the display for 4 seconds (a blank space is made in the meantime) and then the unit enters recording pause mode.
To record less than a
To record more than a
2 Press ato resume recording.
To erase a tape1Insert the tape in DECK 2. Set the tape to the desired point if needed.
2Press DECK1/2 to select "T2".
3Press wREC/REC MUTE.
Whole tape dubbing1Turn the Dial Function to select the TAPE function.
2Insert the original tape in DECK 1 and the recording tape in DECK 2.
3Press SYNC DUB.
The tapes are rewound to the beginning of the front side and recording starts.
•Dubbing cannot start from a point halfway in the tape. •Only one side of the tape can be recorded at a time.
To stop dubbingPress s.
Edited CD recordingAI Edit Recording
When recording a whole CD, AI Edit Recording takes the length of your tape into account and rearranges the recording order of the tracks if necessary, so that no track is cut short at the end of the side. Prepare a tape long enough to record the CD.
1Insert the recording tape in DECK 2.
2Turn the Dial Function to select the CD function and load disc(s).
3Press SHIFT+CD EDIT/CHECK once on the remote control.
"EDIT" is displayed and "AI C-00" appears on the display.
4Press DISC DIRECT PLAY 1-3 to select a disc.
5Press the numbered buttons on the remote En control to enter the length of the recording tape.
10 to 99 minutes can be specified.
- For a 60-minute tape press 6 and 0.
In a few seconds, the unit determines the tracks to be recorded for each side.
The recording time left for side A appears on the display.
•f, gor MULTI JOG can also be used to specify tape length.
6Press wREC/REC MUTE to start recording on side A.
On the remote control, press REC MODE and then press wREC/REC MUTE within 3 seconds.
The tape is rewound to the beginning of side A and recording starts.
Go to the next step when recording on side A finishes.
7Press SHIFT+CD EDIT/CHECK once on the remote control.
The recording time left for side B appears on the display.
8Turn over the tape and press wREC/REC MUTE to start recording on side B.
On the remote control, press REC MODE and then press wREC/REC MUTE within 3 seconds.
•AI Edit Recording cannot be used with discs with more than 30 tracks. "TR OVER" is displayed.
•Recording cannot start from a point halfway in the tape.
15