OPERATING SUB WOOFER

POWER

POWER: Turns the power on and off.

VOLUME: Adjusts the volume of the sub woofer.

-The volume level should be balanced with that of all other channels.

-If the sound is distorted, turn VOLUME down on the sub woofer or lower the sub woofer level on the receiver.

-To avoid overloading the sub woofer, do not set the volume of the receiver so high that the sound becomes distorted.

AUTO POWER: Switches AUTO POWER function on and off. When the function is set to ON:

-The power is automatically turned off and the unit enters the standby mode when receiving no signals for about 12 minutes.

-The power is automatically turned on when receiving the signal input again.

If the level of the signal input is low, the sound may be cut or the unit may not turn on again by this function.

TURN OVER: Adjusts the output sound range between "300 Hz and under" and "40 Hz and under".

Turning it clockwise changes the output sound range wider and reproduces comparatively high frequency sound as well. Adjust it to suit your preference and a playback source.

AUTO POWER

VOLUME

TURN OVER

NOTE

After using, press POWER to turn off the power.

If the sub woofer will not be used for a long time, unplug the AC En cord from the outlet.

ENGLISH 7