Aiwa XP-SN70 Using the dry batteries, Using the AC power adaptor, BConnecting to a power source, Notes, to DC IN 4.5, to Connecting, power a source, t t t t t “Lo batt”

BConnecting to a power source

You can use the following power sources:

•LR6 (size AA) alkaline batteries

•AC power adaptor

For the battery life, see “Specifications” (page 29).

Using the dry batteries

For inserting procedure, see “Playing an audio CD or ATRAC3plus/ATRAC3/MP3 files” (page 10).

To attach the battery compartment lid

If the battery compartment lid is detached by an accidental drop, excessive force, etc., attach it as illustrated below.

To remove the batteries

Press down the # side of the batteries and remove them.

Using the AC power adaptor

Connect the AC power adaptor to the DC IN 4.5 V jack and an AC outlet.

When to replace the batteries

You can check the remaining power of the batteries in the display.

Replace the batteries when “ ” flashes.

t t t t t “Lo batt”*

* Beep sounds.

When the batteries are depleted, replace both batteries with new ones.

Notes

•	The indicator sections of		roughly shows the
	remaining battery power. One section does not
	always indicate one-fourth of the battery power.
•	Depending on operating conditions, the indicator
	sections of	may increase or decrease.

to DC IN 4.5 V

to an AC outlet

to Connectingpower a source

23