Symptom

Cause and/or corrective actions

Playback starts from the

c The resume function is working. To start play from the first track,

point you stopped. (resume

press and hold u during stop until the first track starts playing, or

function)

open the lid of the CD player. Or remove all power sources, then

 

insert the batteries or connect the AC power adaptor again.

 

(pages 10, 12, 23)

 

 

Rustling noise is heard from

c Close the lid of the battery compartment firmly. (page 10)

the CD.

 

During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally.

cThe CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.

“NO FILE” appears in the display after u is pressed or the lid of the CD player is closed.

cThere are no ATRAC3plus/ATRAC3/MP3 files in the CD.

cA CD-RW from which the data has been erased is being used.

cThe CD is dirty.

If the problem still persists, disconnect all power sources, then insert the batteries or connect the AC power adaptor again. (pages 10, 23)

When the lid of the CD player is closed, the CD starts rotating.

cThe CD player is reading the information on the CD. The player is not malfunctioning.

The LCD display becomes

c You are using your CD player at high temperatures (above 40°C/

hard to see or slows down.

104°F) or at low temperatures (below 0°C/32°F). At room

 

temperature, the display will return to its normal operating

 

condition.

“” is flashing quickly in the display, and you cannot locate the beginning of the track or the specific point in the track.

cThe CD player has entered the Bookmark track play. Press

PLAY MODE/ repeatedly until “” disappears from the display.

28