12
En
To stop recording
Press s.
To pause recording (only for TUNER or AUX source)
Press a. Press again to resume.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed playback") and
then press w.
To record a 4-second blank space (only for TUNER
or AUX source)
Inserting 4-second blank spaces may help you locate the
beginning of the track on other equipment.
1 Press w during recording or in recording pause mode.
"4" flashes on the display for 4 seconds (a blank space
is added) and then the unit enters recording pause mode.
2 Press a to resume recording.
To record a blank space shorter than 4 seconds, press w
again while "4" flashes.
To record a blank space longer than 4 seconds, press w
again after the unit enters recording pause mode. Each time
the button is pressed, a 4-second blank space is added.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Press AUX.
If optional equipment is connected to the AUX jacks, turn it
off.
3 Press w.
Edited CD recording
AI Edit Recording
Preparation
Prepare a tape that is longer than the CD length.
When recording a whole CD, AI Edit Recording takes the length
of your tape into account and rearranges the recording order of
the tracks if necessary, so that no track is cut short at the end
of the side.
(AI: Artificial Intelligence)
•Recording cannot start from a point halfway in the tape.
•AI Edit Recording cannot be used with discs containing more
than 30 tracks.
1
Insert the recording tape.
2
Press CD and load the disc.
3
Press MODE three times on the remote control
in stop mode.
"AI C-00" is displayed.
4
Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
- For a 60-minute tape press 6 and 0.
In a few seconds, the unit determines the tracks to be
recorded for each side.
The recording time left for side A appears on the display.
•for g can also be used to specify tape length.
5
Press w to start recording on side A.
The tape is rewound to the beginning of side A and
recording starts.
When recording on side A finishes, "SIDE CHA" appears
on the display. Proceed step 6.
6
Press MODE once on the remote control.
The recording time left for side B appears on the display.
7
Turn over the tape and press w to start recording
on side B.
Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your tape.
•Recording cannot start from a point halfway in the tape.
•You cannot program more than 30 tracks.
•You cannot program a track with a track number larger than
30.
1
Insert the recording tape.
2
Press CD and load the disc.
3
Press MODE four times on the remote control in
stop mode.
"PRGM C-00" is displayed.
4
Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
- For a 60-minutes tape press 6 and 0.
•for g can also be used to specify tape length.
5
Press the numbered buttons on the remote
control to select the first track to be recorded on
side A.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.