11
En
TAPE OPERATIONS
Playback
Use only type I (normal) tapes.
1
Press TAPE.
2
Press z to open the cassette holder.
3
Insert the tape.
Insert with the exposed side down and playback side facing
out from the unit.
4
Press c to start play.
To stop playback
Press s.
To pause playback
Press a. Press again to resume.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter on the display is
reset to "0000".
Opening and closing the cassette holder will also reset the
tape counter.
Notes on cassettes
•Use of 120-minute or longer tapes is not recommended
since they are extremely thin and easily deformed or
damaged.
•Wind up any slack in the tape with a pencil or similar tool
before use. Slack tape may jam in the mechanism.
Basic recording
Use only type I (normal) tapes. Only one side of the tape can
be recorded on at a time.
1
Press TAPE.
2
Press z to open the cassette holder.
3
Insert the recording tape.
Insert with the exposed side down and recording side
facing out from the unit.
4
Prepare the source.
To record CD, press CD and load a disc.
To record a radio broadcast, tune in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
5
Press w to start recording.
When recording a CD, CD playback starts automatically.
When recording input from connected equipment,
manually start playback of the source.
•Volume or tone adjustment(s) does not affect recording.
When the tape reaches its end, the recording stops.
TAPE c
a
wREC/
REC MUTE
sCLEAR
zPUSH
EJECT
f,g
MODE
f,g
sSTOP
cPLAY aPAUSE
0-9,+10