Aiwa XS-DS70 REFERENCE

23

En

Care and maintenance

Occasional care and maintenance of the unit and the software

are needed to optimize the performance of your unit.

To clean the cabinet

Use a soft and dry cloth. If the unit surfaces are extremely

dirty, use a soft cloth lightly moistened with mild detergent

solution. Do not use strong solvents such as alcohol, benzine

or thinner.

Care of CDs

When a CD becomes dirty, wipe it from the center out with a

cleaning cloth. After playing a CD, store it in its case. Do not

keep it in hot or humid places.

REFERENCE

Troubleshooting

If your unit fails to perform properly, check the following guide

and the relevant sections of the Operating Instructions.

There is no sound.

•Are the speakers and AC power cord connected properly?

The unit shut off suddenly.

•Possibly a short circuit in the speaker terminals. Disconnect

the AC power cord from the AC power outlet and re-connect

the speaker cords correctly.

The unit blacks out when the unit is turned off.

•Is ECO mode set to on?

Erroneous display.

•Reset the unit.

Poor radio reception.

•Check antenna connection. Adjust the antenna to find the

best reception.

•Move unit and antenna away from other electric appliances

and cords.

The CD player works poorly.

•Is the disc correctly loaded?

•Is the disc dirty?

•Is the lens affected by condensation? If so, wait

approximately one hour and try again.

Resetting the unit

If an unusual condition occurs in the display window, reset

the unit as follows:

1 Press POWER to turn off the power.

If the power cannot be turned off, disconnect the AC power

cord, then plug it in again.

2 Hold down FUNCTION MODE and press POWER.

Everything stored in memory after purchase is cleared.

Contents

Main Compact Disc Stereo System XS-DS70 U PRECAUTIONS WARNING TABLE OF CONTENTS System and accessories PREPARATIONS Connection Connect the speaker cords to the front speakers, surround speakers and center speaker. Connect the front speakers. Connect the surround speakers. Connect the center speaker. Connect the subwoofer. Remote control Positioning the speakers PARTS AND CONTROLS Main unit: rear Dynamic Integrated Neo Amplifier Main unit: front Buttons with same or similar names with the main unit basically have the same function. Remote control ADJUSTMENTS BEFORE OPERATIONS Power Volume Turn VOLUME (Press VOL N,M on the remote control). DEMO ECO mode Reduces power consumption with the following operations, etc. Display color The display color can be changed. Setting the clock CD OPERATIONS Random/Repeat playback Press RANDOM/REPEAT repeatedly on the remote control to select one of the following modes: To play one desired disc, press DISC DIRECT PLAY 1-3. To play all discs, press c. Programmed playback Plays back up to 30 selected tracks in programmed order. Press PRGM on the remote control during stop. Press DISC DIRECT PLAY 1-3 to select a disc. Press the numbered buttons on the remote control to program a track. RADIO OPERATIONS Manual tuning Preset tuning Preset your favorite stations and tune them in directly. Presetting stations Adjustments LISTENING TO EXTERNAL SOURCES Playing a digital source Playing an analog source Dolby Surround Playing Dolby Surround sound Playing Dolby Digital sound H For software with the For software with the logo. Subwoofer On or Off mode Play the Dolby Surround sound. Press MANUAL SELECT on the remote control. Press f to display "S-W OFF" or g to display "S-W ON" to select the desired mode. Adjustments Low-frequency effect level adjustment Delay time adjustment Dynamic range adjustment SOUND ADJUSTMENTS Super T-BASS Emphasizes low frequencies for a powerful sound. BBE Enhances high frequency for sound clarity . TIMER OPERATIONS Sleep timer Turns off the unit automatically after a specified time. Timer playback Press TIMER on the remote control repeatedly until "PLAY" is displayed. Care and maintenance REFERENCE Troubleshooting Specifications NOTE CAUTION Printed in Malaysia For assistance and information (United States and Puerto Rico)