Akai AC-ZP112 manual Mode Button Press once will Change the unit run

Operation

Remote control：

Please point the controller transmission section to the signal receiver

on the unit panel. Indicator lights on the machine control panel can display AUTO, COOLING, FAN, DEHUMIDIFYING, SPEED, TEMPERATURE, TIMER etc information.

Mode Button:
Press once will
change the unit run	MODE
mode.		+
Fan speed Button:	SPEED			℃/ ° F
Press once can	SW ING	_		TIMER
change fanspeed at
sequence of Low,Mid
and High speed.
Swing Button:			O N/ O F F
Ipress swing button to
auto adjust a right and left
direction of wind
Temp Button:
Press this button "+" once
setting room temperature
will increase 1℃.
Press this button "-" once
setting room temperature
will decrease 1℃.

℃/ ° F Button Every time press this botton, the machine control panel shows the temperature in ° C or F on the conversi

Timer Button:

Unit can be auto OFF if the unit is under running and

the unit is ready.

ON/OFF Button: Press once to start,and press again to stop.

Corrosion,oxidation,battery-leaka ge and any other

gradually acidic defect of this nature will invalidate the guarantee.

Remote control (Auto mode)

The microprocessors control the compressor and fan motor on or off according To the room temperature to keep the room comfortable.

Please notice the anode and cathode while mounting the batteries.

2.Press MODE button to choose AUTO mode.

1.Mount batteries and press ON/OFF,the system starts to run.

M OD E
	+
SPEED		℃/ ° F
SW ING	_	TIM ER

-7-