¼ ò ½ é

SETU P

8

Remote Control Battery Installation

4.If you cause a static discharge wh en touching the
unit, and the un it fails to function , simply unpl ug
the unit from th e AC outlet, wait a few m inutes, and
plug it back in. The unit should retur n to normal
operation.
Requires twoAAA batteries(supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the
cover and sliding it off in the direction indicated.
2. Install batteries matching(+) and(-) polarity signs.
3. Replace the battery cover by sliding in reverse until
the lock snaps.
Note: Incorrect installation can cause battery leakage
and corrosion that will damage the Remote
control.
Precautions
Replace batteries in pair.
Do not mix battery types(zinc carbon with
alkaline).
Do not recharge, heat, short-circuit,
disassemble, or burn batteries.