AKG Acoustics C562BL Architects and Engineers Specifications, Graphical Data, Limited Warranty

Architects and Engineers Specifications

The microphone shall be of the boundary layer type suitable for temporary or permanent mounting on flat surfaces.

The microphone shall have a flat circular profile, with the condenser element mounted in the middle. The transducing element shall communicate directly to the outside through small openings. The sensitivity of the microphone shall be at least

20 mV/Pa when mounted on a boundary 4.95 feet (1.5 meters) on a side, and the frequency range shall extend from 20 Hz to 20 kHz. The response shall exhibit an average rise of 6 dB in the range

from 5 kHz to 15 kHz to compensate for losses normally encountered in the operation of boundary layer microphones in the transition region between direct and reverberant fields. The self noise level of the microphone shall be no greater than

16 dB, as measured with A-weighting, and the total harmonic distortion shall be no greater than 1% at operating levels of

130 dB-SPL. The microphone shall accept phantom powering over the range from 9 to 52 volts. The microphone shall be the AKG Acoustics Model C 562 BL.

Graphical Data

On-axis Frequency	Polar Response
Response (measured at 1 meter)

AKG is constantly improving and modifying its products, therefore, specifications are subject to change without notice.

Limited Warranty

Valid only in the United States. AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase for use, and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor. Important: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts or connecting the product to any but the specified receptacles. This warranty is void unless service or repairs are performed by an authorized service center. No responsibility is assumed for any special, incidental

or consequential damages. However, the limitation of any right or remedy shall not be effective where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our service department. Be sure to include your sales slip as proof of purchase date. (We will not repair transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusions and limitation may not apply to you.

Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components

AKG Acoustics GmbH

Lemböckgasse 21–25, P.O.B. 158, A-1230 Vienna/AUSTRIA

Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516

Internet: http://www.akg.com

AKG Acoustics; A Division of Harman Pro Germany Bodenseestraße 228, D-81243 München/GERMANY Tel: (089) 87 16-0, Fax: (089) 87 16-200

Arbiter Pro Audio

Wilberforce Road, London NW9 6AX/ENGLAND Tel: (0181) 202 1199, Fax: (0181) 202 7076

AKG ACOUSTICS, U.S.

914 Airpark Center Drive

Nashville, TN 37217, U.S.A.

Tel: (615) 620-3800, Fax: (615) 620-3875

Studer Japan Ltd.

2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN Tel: (813) 3465-2211, Fax: (813) 3465-2214

Erikson Pro Audio

620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA Tel: (514) 738-3000, Fax: (514) 737-5069

Internet: www.jam-ind.com/eriksonpro

Specifications subject to change without notice.

DS-C 562 BL