Specifications
5 Specifications
Transducer Principle: | dynamic pressure gradient transducer |
Polar Pattern: | cardioid |
Frequency Range: | 17 - 17.000 Hz (±2 dB) |
Sensitivity at 1000 Hz passive: | 1,2 mV/Pa ± |
Electrical Impedance at 1000 Hz: | < 200 Ohm |
Recommended Load Impedance: | > 1.000 Ohm |
Maximum SPL for 0,5 % THD: | 164 dB SPL |
Climatic Conditions: | temperature range: |
| relative humidity at +20 °C: 90 % |
Connector Type: | |
Connector Wiring: | pin 1: ground pin |
| pin 2: AF (in phase) |
| pin 3: AF (out phase) |
Housing Material: | metal |
Finish: | front grille: glossy galvanized nickel matte, |
| rear grille: matte black paint |
Dimensions (H x W x D): | 125 mm x 101 mm x 66 mm |
Weight: | 500 g |
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com.
Frequency Response Curve |
| Polar Pattern | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D12 | VR 0° | Green - switch position left |
D12 | VR 180° | Red - switch position middle |
|
| Blue - switch position right |
16 | D12 VR |
