AKG Acoustics D230 specifications Description, Specifications, Dynamic Microphone Features

D 230

Description

The AKG Model D 230 is a rugged dynamic microphone intended for general use in electronic news gathering (ENG) activities in radio and television. Its response has been tailored for maximum intelligibility of close-in speech, and its omnidirectional pattern is immune to proximity effects. The microphone has an integral windscreen and has been designed for very low handling noise. An internal hum compensation coil allows microphone use in environments where AC hum fields may be significant. The light-weight body is die cast metal and has a dark matte finish for minimum reflection or glare on television. The extra length shaft facilitates station flag placement.

Specifications

Transducer type:	Dynamic
Frequency response:	40 - 20 kHz
	(see family of response curves)
Polar pattern:	Omnidirectional

Impedance (at 1 kHz): 320 ohms

Recommended load impedance: greater than 1000 ohms

Output connector:	XLR-M
Sensitivity:	2.5 mV/Pa; -52 dB (re 1 V/Pa)
Size:	Maximum diameter: 2 in. (50 mm)
	8.5 in. length (218 mm)
Net weight:	8 oz. (225 g)
Shipping weight:	1.9 lb. (840 g)
Accessory included:	SA 44 Stand adapter

Optional accessories: SA 41/1 Stand adapter W 23 Foam windscreen

KM 293/94, KM 293/90, ST 5/3, ST 305 Table stands

Dynamic Microphone

Features

•Response tailored for close-in speech requirements for electronic news gathering (ENG)

•Omnidirectional pattern, with integral wind screen and very low handling noise

•High sensitivity (2.5 mV/Pa)

•Light-weight die cast metal body with dark matte finish

•Hum compensation coil