2 Interfacing
The microphone provides a balanced output on a
XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: return
You can connect the microphone either to a balanced or an un- balanced microphone input.
•To connect the microphone to a balanced input (XLR con- nector), use a commercial XLR cable.
•To connect the microphone to an unbalanced microphone input (1/4" jack), use a cable with a female XLR connector and a 1/4" TS jack plug.
• Please note that unbalanced cables may pick up interfer- | Note: |
ence from stray magnetic fields near power or lighting ca- |
|
bles, electric motors, etc. like an antenna. This may cause |
|
hum or similar noise when you use a cable that is longer |
|
than 16 feet (5 m). |
|
D 7/D 7 S/D 7 LTD | 15 |