1. Introduction
The WLS 8060 ”MAX” is a high quality powered loudspeaker for
a wide range of applications. It allows you to set up a mobile or
fixed sound system quickly and easily. This professional design is
easy to use even if you are not familiar with the intricacies of
sound reinforcement. A clear control layout and rugged case
make the WLS 8060 ”MAX” a user-friendly tool for every sound
system application.
2. Safety
2.1. Precautions
1. This device has been manufactured and tested in accordance
with the German VDE safety guidelines for electronic equip-
ment. It has left the factory in perfectly safe condition. In order
to maintain safety and avoid risks of damage or injury, take
the usual precautions and follow all safety instructions in the
manual.
2. This device conforms to the German Class 1 safety standards.
When properly installed, all exposed metal parts are perma-
nently connected to safety ground. For safety reasons,
connect the equipment to a standard three-pin outlet with pro-
tective ground only. Never open the safety ground con-
nection.
3. This device conforms to the EMC legislation currently in force
as certified by the CE mark on the device.
4. This device contains no user serviceable parts. To reduce the
risk of fire or electric shock, do not open the device and refer
servicing to qualified personnel.
5. Make sure to dispose of used batteries conforming to local
waste disposal rules. Never throw batteries into the fire (risk
of explosion).
2.2. Potential Risks
If the equipment
• is visibly damaged;
• contains loose parts;
• does not operate correctly;
• has been stored under adverse conditions (e.g., outdoors or
in a damp room) for extended periods of time; or
• was exposed to high transportation stress (e.g., due to in-
adequate packaging),
operating the equipment may be unsafe. Switch power to the
equipment off and mark the equipment.
Make sure the equipment cannot be connected to power or
switched on unintentionally by third persons.
3. Unpacking
Your WLS 8060 ”MAX” comprises the following components:
1WLS 8060 powered loudspeaker
1HT 80 handheld transmitter with D 880 WL1
microphone element or PT 80 bodypack trans-
mitter (without microphone)
1AC adapter
1CB 6060 carrying case
2receiving antennas
Please check that the package contains all components of the
system you ordered. If anything is missing, please contact your
AKG dealer immediately.
4. Description
4.1. General
The WLS 8060 is a powered loudspeakder with an rms power of
40 W. A built-in mixer with 2-band equalizer lets you connect a
CD player or similar audio source, one wired microphone, and
the supplied wireless microphone for simultaneous operation.
The integrated WMS 80 Series receiver provides highly reliable
reception and excellent sound quality. The supplied handheld
transmitter with microphone element or bodypack transmitter
makes the WLS 8060 ”MAX” a complete sound system for wired
or wireless operation.
For mains independent operation, the WLS 8060 features a built-
in high quality, leakproof lead gel rechargeable battery that con-
forms to the strict standards of the German Association of Casualty
Insurers.
The battery features much lower self-discharge and a better
capacity/volume ratio than nickel-cadmium batteries and has no
memory effect. Its capacity is 7.2 Ah.
4.2. Optional Accessories
WLS 8060:
RP 6060 rain cover
CB 6060 carrying case
STWLS stand
HT 80:
D 3700 WL1, D 3800 WL1, C 5900 WL1, C 535 WL1
microphone elements
W 880 foam windscreen for D 880 WL1
W 3001 foam windscreen for D 3700 WL1, D 3800 WL1,
C 5900 WL1
W 23 foam windscreen for C 535 WL1
PT 80:
C 417 L, C 419 L, C 420 L, CK 77 L microphones
MKG/L guitar cable for electric guitar or bass, or portable key-
boards
CB 60 carrying case
4.3. Controls
All controls, inputs, and outputs of the WLS 8060 are located on
the loudspeaker enclosure rear panel. Refer to fig. 1 on the next
page.
A sturdy carrying handle is integrated in the rear panel of the
enclosure.
11
WLS 8060 ”MAX”