TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manuals thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators:

REQUIRED OF THE OWNER

1.Provide a Roll-Over-Protective Structure that meets the requirements of this standard.

2.Provide seat belts that meet the requirements of this paragraph of this standard and SAE J4C.

3.Ensure that each employee uses such seat belt while the tractor is moving.

4.Ensure that each employee tightens the seat belt sufficiently to confine the employee to the protected area provided by the ROPS.

REQUIRED OF THE OPERATOR

1.Securely fasten seat belt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.Stay off slopes too steep for safe operation.

5.Watch where you are going, especially at row ends, on roads, and around trees.

6.Do not permit others to ride.

7.Operate the tractor smoothly, no jerky turns, starts, or stops.

8.Hitch only to the draw bar and hitch points recommended by the tractor manufacturer.

9.When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all machinery guards

in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Page 172
Image 172
Alamo 02988075P manual To the OWNER/OPERATOR/DEALER