(SL-32)
(SL-11)
(SL-15)

ASSEMBLY

Do not use an attachment that is not securely attached to the quick hitch, The attachment could fall resulting in severe crushing injuries or death to the operator or bystanders.

•Rotate both hitch pin levers down to the locked position. You should feel a firm resistance when locking the levers down. The pins must extend through the slots in the bottom of the attachment bracket.

•Examine the fit between the quick hitch and the bottom of the attachment bracket. The pins must extend through the slots in the bottom of the attachment bracket. The tapered side of each pin must be firmly wedged against the surface of the slot on the bottom of the attachment bracket. The attachment bucket should fit snugly against the bottom of the quick hitch bracket. If there is a gap of more than 1/8” or if the pins are not firmly seated do not use the attachment. Contact your dealer before using the attachment.

•On level ground, tilt the attachment down 90° degrees and lower it to the ground. Lower the loader further to slightly raise the front of the tractor off the ground. Drive the tractor in reverse while the attachment is on the ground for 20-30 feet to ensure the attachment does not disconnect. If the attachment disconnects during this process, discontinue the use of the attachment and contact your dealer.

NEVER walk or work under or allow any person to be underneath a raised loader or attachment.

Only mount the loader on a tractor that is listed on the mounting instructions. Never mount on a tricycle steering front axle. Move the tractor front and rear wheels to the widest spacing and add the recommended rear tractor ballast to prevent tractor tip over. Keep the tractor tires properly inflated. Maintain at least 25% of the total Tractor and Loader weight including the maximum load in the bucket or attachment on the rear axle. Always wear your seatbelt and make sure the ROPS structure is fully deployed to prevent serious injury or death from the tractor tipping over.

Make sure all air is purged from the hydraulic system before using the loader. Air in the system can cause the loader to respond sluggishly or with unexpected movement. The air can be purged from the cylinder lines by fully cycling the cylinders several times from the fully closed to fully open position. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

4211-4211SS MSL 01/11

Assembly Section 3-3

© 2011 Alamo Group Inc.

ASSEMBLY

Page 36 Page 38
Page 37
Image 37
Alamo 4211 MSL manual Assembly
Page 36 Page 38

4211 MSL specifications

The Alamo 4211 MSL stands out in the realm of compact RVs, blending functionality with innovative design to ensure an enjoyable travel experience. This model is specifically engineered to cater to the needs of outdoor enthusiasts, offering a harmonious balance of comfort and versatility.

One of the main features of the Alamo 4211 MSL is its spacious and thoughtfully designed interior. With a layout that optimizes the available space, it offers sleeping accommodations for up to four people, making it perfect for small families or groups of friends. The well-appointed kitchen includes modern appliances, such as a two-burner stove, a microwave, and a refrigerator, enabling travelers to prepare home-cooked meals on the road. Additionally, ample storage compartments throughout the unit provide practical solutions for organizing gear and personal items.

In terms of technology, the Alamo 4211 MSL incorporates advanced features that enhance the travel experience. An integrated entertainment system with Bluetooth capabilities allows occupants to enjoy their favorite music or movies, while LED lighting ensures energy efficiency and brightens the space. The model also comes with a comprehensive control panel, giving users the ability to monitor and manage various systems with ease, including water levels and battery status.

One of the standout characteristics of the Alamo 4211 MSL is its robust construction and user-friendly design. The exterior is built with durable materials, ensuring that it can withstand the rigors of outdoor adventures. The inclusion of high-quality insulation keeps the interior comfortable in various weather conditions, whether it be hot summers or cold winters.

The innovative pop-up roof feature is another notable aspect, allowing for increased headroom and a more spacious feel within the living area. This versatility makes it easier to enjoy activities inside the RV, whether it’s playing games or relaxing after a day of exploration.

Furthermore, the Alamo 4211 MSL's lightweight design contributes to better fuel efficiency and ease of towing. Its compact size enables access to more remote and scenic locations while still providing the comforts of home.

In conclusion, the Alamo 4211 MSL is a thoughtfully designed RV that caters to the needs of travelers seeking adventure without compromising on comfort. With its ideal combination of space, technology, and construction quality, it promises a rewarding experience for both seasoned RVers and newcomers alike.
Top Page Image Contents