MAINTENANCE
MAINTENANCE
HYDRAULIC SYSTEM (Pump and Tank Kit)
Oil Requirements
Tank
The machine is delivered from the factory without oil. Fill the reservoir with a light hydraulic oil as recommended in the chart until the oil level is approximately 2” below the top of the tank. The total capacity is approximately 23 liters (5 gallons). Do not overfill.
For ease of filling when large quantities are involved the strainer basket can be prised from its housing. If filling in this manner, make sure that new oil is used and that the area around filler and any filling utensils are clean.
Supplier | Cold or Temperature Climate | Hot Climate |
|
|
|
Castrol | Agricastrol hydraulic oil | |
|
| |
|
|
|
Shell | Tellus 27 | Tellus 33 |
|
|
|
Mobil | D.T.E. 25 | D.T.E. 26 |
|
|
|
Esso | Nuto “H” or “A” 32 | Nuto “H” or “A” 68 |
|
|
|
Texaco | Rando HD 32 | Rando HD 68 |
|
|
|
Gulf | Hydrasil 32 | Hydrasil 68 |
|
|
|
B.P. | Energal HLP 32 | Energal HLP 68 |
|
|
|
Dalton | Silkolene Dove 32 | Silkolene Dove 68 |
| or Derwent 32 | or Derwent 68 |
|
|
|
Elf | Hydrelf 32 | Hydrelf 68 |
|
|
|
SWINGTRIM 03/09 | Maintenance Section |
© 2009 Alamo Group Inc.
