![](/images/new-backgrounds/1270063/2700635x1.webp)
1.2Getting started
1.2.1Set-up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card.
SIM1
SIM2
Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.
For dual SIM models, both SIM1 and SIM2 can support 2G and 3G networks, but when 3G SIM cards are inserted into both SIM1 and SIM2 slot at the same time, only SIM1 will support 3G network.
Your phone only supports mini SIM cards. In order to avoid causing damage to your phone, do not attempt to insert other SIM types, such as micro or nano cards.
Installing or removing the battery
Please power off your phone before removing the battery.
•Insert and click the battery into place, then close the cover.
•Unclip the cover, then remove the battery.
5
Installing the microSD card
To install, please open microSD card lock first, and then place the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, please open microSD card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and outlet respectively.
The charging status bar will not float if your battery is completely consumed. To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off
6
IP4909_4032E_QG_Eng_USA_02_140513.indd |