1.2Getting started

1.2.1Set-up

Inserting or removing the Micro-SIM card

You must insert your Micro-SIM or MicroSD card to make phone calls. Before inserting/removing the Micro-SIM or MicroSD card, you should ensure the phone is off, to protect it from corruption or damage.

To install, press the small hole on Micro-SIM & MicroSD card protector by SIM card tool, and then pull out the Micro-SIM & MicroSD card slot. Put the Micro-SIM card or MicroSD card into the slot with chip facing downward, and then pull in the slot.

To remove the card, open card protector by using SIM card tool, fetch out Micro-SIM card or MicroSD card, and then pull in the slot.

Your phone only supports Micro-SIM card. Do not attempt to insert other SIM types such as mini and nano cards, otherwise you may damage your phone.

Charging the battery

Connect the battery charger to your phone and outlet respectively.

If the battery is very low, there will be no indication that power is being received until the charge is sufficient to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc.

1.2.2Power on your phone

Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up.

Set up your phone for the first time

The first time you power on the phone, you should set the following options: language, date & time, Google account, etc.

1.2.3Power off your phone

Hold down the Power key from the Home screen until the Phone options appear, select Power off.

6

7