9
Precautions for use / Declaration of compliance
4
9
Other

Precautions for use

This terminal and the supporting radio equipment have been designed for use with an Alcatel-
Lucent OmniPCX Office system and have been officially approved for private use between wireless
telephones via the associated private exchange The following conditions must be respected, notably
concerning the use of radioelectric frequencies:
DECT equipment can only be used to establish links between fixed points if these links are
temporary and the equivalent isotropically radiated power at the antenna is less than
250 mW.
The conditions of access to a DECT equipment telepoint network shall be stipulated by
contract with the attendant of the authorized telepoint network concerned.
The power outlet used must be close to the charger/holder and easily accessible, so that it
can be used as a way to turn power on or off.
Switch off the telephone before changing the battery.
Do not expose your telephone to severe conditions (rain, sea air, dust, etc.).
Correct operation of your telephone is not guaranteed at temperatures outside the range -
10°C to +45°C.
You must not switch on or use your telephone near gas or inflammable liquids.
A volume level that is too high can cause irreparable loss of hearing. Adjust the sound
volume of your handset to a reasonable level.

Declaration of compliance

We, Alcatel-Lucent Enterprise, hereby declare that we assume the Alcatel-Lucent 300 DECT
Handset and Alcatel-Lucent 400 DECT Handset to be compliant with the essential
requirements of Directive 1999/5/CE of the European Parliament and Council.
This equipment uses the DECT harmonised frequency spectrum and can be used in all the countries
of the European Community, Switzerland and Norway.No guarantee is given concerning possible
interference affecting DECT equipment, due to other authorised utilisation of the radio frequencies
concerned.
This device has been designed and manufactured not to exceed the SAR (Specific Absorption Rate)
radio frequency power transmission limits established by the different countries concerned. The
SAR value measured is equal to 0.061 W/kg (the globally accepted maximum limit being 1.6 W/kg).
Consumption in standby: 20 mW.
The labels and icons presented in this document are not contractually binding and may be modified
without prior warning.
The labels and icons displayed on your phone depend on the system to which you are connected
and may differ from those specified in this document.
Any unauthorised modification to the product shall render this declaration of compliance null and
void. A copy of the original of this declaration of compliance can be obtained by post from :
Alcatel-Lucent Enterprise - Technical Services - Approvals Manager
1, route du Dr. Albert Schweitzer
F 67408 Illkirch Cedex - France
Information relative to the environment
This symbol indicates that at the end of its life, this product should be subject to
special collection and disposal in member countries of the European Union, as well as
in Norway and Switzerland. By ensuring this product is disposed of correctly, you will
help to conserve natural resources and help prevent potential negative consequences
to the environment and human health which could otherwise be caused by
inappropriate disposal of this product. For further details about recycling this product,
please contact the supplier who sold you the product.

ATIGR060-004

3BN60370USAAed01.fm Page 9 Jeudi, 14. juin 2007 4:38 16