Physical Specifications

Service Router DS1/E1 ATM IMA CMA Feature Details

IMA options include:

•n x T1/E1 ATM IMA version 1.1

•1 to 8 member links per bundle

High-availability options include:

•IMA bundle and state configuration

•Non-stop service (NSS) for IES and VPRN

•NSS for VPLS and VPWS

Alcatel-Lucent 7710 Service Router (SR) Family

The Alcatel-Lucent Service Router (SR) family includes the 7710 SR and the 7750 SR. Both are purpose-built IP multiservice edge routers, targeted for service providers, cable multiservice operators (MSOs) and enterprise customers committed to delivering

a new wave of triple play, premium business virtual private network (VPN) and multimedia mobile services. Deployed worldwide in over 190 customers, the Alcatel-Lucent SR has become the platform of choice for network transformations and convergence of services over a single IP/MPLS network.

For locations requiring compact form factor and high-density TDM aggre gations, such as smaller point of presence sites (POPs), collocation sites and mobile RANs, Alcatel-Lucent offers the 7710 SR. By leveraging the same software and hardware design philo sophy as the 7750 SR, the 7710 SR delivers cross-platform consistencies and packet efficiency to the outer parameter of a carrier’s networks.

The Alcatel-Lucent 7710 SR is available in two chassis sizes: 4-slot and 12-slot. With slots designed to accept CMAs and selective Media Dependent Adapters (MDAs), the 7710 SR-c4 can support up to four CMAs, and the 7710 SR-c12 up to eight CMAs. Each CMA has a 1.5-Gb/s full-duplex connection to the Control and Forwarding Module (CFM). With cost-optimization built into every CMA, operators can right- size a 7710 SR for a very specific deployment.

Features of the Alcatel-Lucent

SR OS

In addition to the highlighted ATM IMA features, the 7710 SR supports the full scope of the Alcatel-Lucent SR OS feature set, including:

•Flexible, high-performance services:

¬VPLS

¬Border Gateway Protocol (BGP)/ Multiprotocol Label Switching (MPLS) VPN (based on RFC 4364)

¬Dedicated Internet access services

¬Ethernet, Frame Relay and ATM VPWS

•High-performance IP and MPLS tunneling

•Rich MPLS multiservice transit capabilities

•Flexible Fast Path technology, providing packet processing

•Thousands of configurable ingress/ egress access control lists (ACLs)

•Scalable BGP, Open Shortest Path First (OSPF) and Intermediate System-to-Intermediate System (IS-IS) routing with traffic- engineering extensions

•Per-service hierarchical QoS (H-QoS)

•Granular, per-service accounting and billing

•Extensive operations, administration and maintenance (OAM) tools for service-aware troubleshooting and faster service activation

Table 1. Alcatel-Lucent 7710 SR CMA Compatibility Matrix

Part Number	Description	Interface Type	Applicable in 7710 SR
3HE02186AA	8 Port	RJ-48c	√
	DS1/E1 ATM

Technical Specifications

Dimensions

•Height: 4.83 cm (1.9 in.)

•Width: 9.78 cm (3.85 in.)

•Depth: 29.85 cm (11.75 in.)

•Weight: 0.408 kg (0.9 lb)

Environmental Specifications

•Operating temperature: 0 C to 40 C (32 F to 104 F)

•Relative humidity: 15% to 85% (non-condensing)

•Altitude: 1,800 m (5,906 ft)

Regulatory Agency Standards

•Safety: EN 60950-1; IEC 60950-1; EN 60825-1& 2; UL 60950-1; CSA 60950-1; AS/NZS 60950-1

•EMC: EN300 386; EN55022: EN55024; FCC Part15 Class A;

•IC ICES-003 Class A; AS/NZS CISPR22

•Telecom: ACTA TIA-968-A (USA); IC CS-03 (Canada); AS/NZS S016:2001 (Australia)

•Regulatory markings: CE Mark (Europe); WEEE (Europe); A-Tick (Australia)

www.alcatel-lucent.com

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.