
WRAPPING THE TELEPHONE LINE CORD
In desktop mode, you may want to wrap the excess telephone line cord through the grooves provided on the bottom of the base.
TELEPHONE BASICS
RECEIVING A PHONE CALL
1.When the phone rings, simply lift the handset and begin your conversation.
2.To end of conversation, return the handset to cradle.
RINGER VOLUME
You may control the ringer volume level with theswitch located on the bottom of the base.
= ringer tone will be loud
= ringer tone will be middle = ringer tone will be low.
PLACING A PHONE CALL
1.Lift the handset and wait for a dial tone.
2.Dial the telephone number you wish to call.
FLASH BUTTON
Press the FLASH button instead of using the hook switch to activate | ||
customer calling services such as call waiting or | Flash | |
call transfer, which are provided by your | button | |
local phone company. Select the appropriate |
| |
flash timing (on the bottom of the base, |
| |
600ms,300ms,100ms). | Redial | |
REDIAL BUTTON | ||
button |
This unit redials up to 32 digits. To automatically redial the last number you called: 1. Pick up the handset to get a dial tone.
2. Press redial.
TEMPORARY TONE FEATURE
If you have Pulse (rotary) service, and want to access customer calling services that require
1. | Press the TONE button ( * ) after you |
|
| have connected to the service in order |
|
| to enable |
|
2. | When you hang up, the phone auto- | TONE button |
| matically returns to Pulse dialing mode. |
|
TROUBLESHOOTING TIPS
| PROBLEM | SOLUTION | |
| No dial tone | Check hook switch to make sure it pops up. | |
| Won't dial out | Make sure TONE/PULSE is set to correct | |
|
| position. | |
| Phone doesn't ring | You might have too many phones on | |
|
| one line. |
|
| Feedback when dialing | This is normal, Power fluctuates with | |
| in PULSE mode | phone outpulsing. |
|
| Can't be heard by | Make sure phone cord is securely | |
| other party | plugged in. | |
|
| Make sure other phones aren't off the | |
|
| hook at the same time you're using the | |
|
| phone. It is normal for the volume to drop | |
|
| when additional phones are used at the | |
|
| same time. |
CARE AND MAINTENANCE
To keep your phone working and looking good, follow these guidelines:
Avoid putting near heating appliances and devices that generate electrical noise (for example, motors and fluores- cent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment of the unit.
Never use a strong cleaning agent or abrasive powder because this will damage the finish.
Retain the original package in case you need to ship it at a later date.
Used equipment must be disposed of in compliance with current environmental protection regulations.
You should return it to your reseller or dispose of it in an approved recycling centre.