Using the HDD PortaCruiser

Duplicator Mode

Advanced Setup Menu: 8-01 ReScan Bus Delay

This function is used to set the time interval between the system’s re-scans of all connected HDD devices.

1.Press and hold ESC for about 3 seconds to access the “Adv Setup” menu. The following screen will be displayed.

8. Adv Setup

ENT RESET

ESC MUTE

2.Use the arrow buttons (or) to scroll to “ReScan Bus Delay”. The following screen will be displayed.

ReScan Bus Delay

ENT RESET

ESC MUTE

3.Press ENT to display the current configuration setting. Use the arrow buttons (or) to choose different time settings (1-60 seconds). After changing a setting, remember to press ENT to save it.

ReScan Bus Delay 20Sec

ENT RESET

ESC MUTE

www.aleratec.com31