Using the HDD PortaCruiser

Duplicator Mode

Advanced Setup Menu: 8-02 Read Error Skip

This function can be enabled to ignore any error that occurs during copying. By default, the HDD PortaCruiser will halt the copy operation when it encounters an unreadable area of the source hard disk and display an error. Enabling this option will ignore any bad sectors on the source hard drive by skipping over them.

Warning: Setting this function to “On” may result in corrupt data on copied hard drives.

1.Press and hold ESC for about 3 seconds to access the “Adv Setup” menu. The following screen will be displayed.

8. Adv Setup

ENT RESET

ESC MUTE

2.Use the arrow buttons (or) to scroll to “Read Error Skip”. The following screen will be displayed.

8-02. Adv Setup Read Error Skip

ENT RESET

ESC MUTE

3.Press ENT to display the current configuration setting. The default setting is “Off”.

Read Error Skip Off

ENT RESET

ESC MUTE

4.Press the arrow buttons (or) to toggle the option “On” or “Off”. After changing a setting, remember to press ENT to save it.

32www.aleratec.com