Specifications
Power Requirements | Voltage: |
| Current: |
|
|
Dimensions | D: 150mm W: 116mm H: 27mm |
(depth x width x height) | (5.9” x 4.6” x 1.0”) |
Weight | 235g (0.5 Lbs.) |
|
|
Note: Specifications subject to change without notice.
Troubleshooting
If your HDD PortaCruiser is not performing as expected, refer to the symptoms below, and follow the suggested corrective action.
Symptoms | Corrective Actions |
|
|
LCD Display | If the LCD display does not display any message and |
| the backlight is not lit after powering on the HDD |
| PortaCruiser, check that the power cable is properly |
| connected and that the ON/OFF switch is turned on. |
Error Messages | While the system is performing an operation and the |
| operation is manually terminated, an error message will |
| be shown in the LCD display. This may lead to an failed |
| operation and could cause the HDD PortaCruiser to stop |
| responding. If this happens, power the unit off, wait about |
| ten (10) seconds, and then reapply power. |
Hard Disk | If the HDD PortaCruiser does not detect one of the hard |
| disk drives, verify that the drive is properly connected. |
Keypad Buttons | If pressing the keys on the front panel produces no |
| response from the system, the HDD PortaCruiser may still |
| be busy with the previous operation. If the system idle, |
| power the unit off, wait about ten (10) seconds, and then |
| reapply power. |
Startup/Shutdown | Do not power off the system while it is performing an |
| operation. After a normal shutdown, wait about ten (10) |
| seconds before reapplying power. |
www.aleratec.com49