Using the HDD Copy Dock Duplicator

Advanced Setup

Advanced Setup Menu: 7-1 Read Error Skip

This function can be enabled to ignore any error that occurs during copying. By default, the HDD Copy Dock Duplicator will halt the copy operation when it encounters an unreadable area of the source hard disk and display an error. Enabling this option will ignore any bad sectors on the source hard drive by skipping over them.

Warning: Setting this function to “On” may result in corrupt data on copied hard drives.

1.Use the arrow buttons to scroll to “Advanced Setup”. The following screen will be displayed:

HDD7. AdvancedDuplicatorSetup

1-1 ver:

UPENT

POWER

DOWNESC

2.Use the arrow buttons to scroll to “Read Error Skip”. The following screen will be displayed:

HDD7.AdvancedDuplicatorSetup

UP

ENT

17-1. Read Errver:Skip

 

POWER

DOWN

ESC

 

3.Press ENT to display the current configuration setting. The default setting is “Off”.

HDDReadDuplicatorError Skip

1Off-1 ver:

UPENT

POWER

DOWNESC

Press the arrow buttons to toggle the option to “Disable” or “Enable”.

After changing a setting, remember to press ENT to save it.

Note: This setting will only apply for the current job. If desired, it will need to be set again for subsequent jobs.

16www.aleratec.com