Aleratec 360105 11

Installation

Unpacking the Unit

Set the components on a flat, level surface that will hold the printer, autoloader and your PC. Next, carefully remove the packing material that contains the above items. Then place all shipping materials back into the shipping carton for future use.

Note: It is important to keep the original shipping container and packaging. In the event you misplace your packaging and need to ship the RoboJet Disc AutoPrinter with Continuous Ink System, you must first contact the service department to purchase a new shipping container for a small fee.

Check for all the components and proceed to the next step.

Printer Installation

Install Printer:

Follow the instructions that came with the printer and install the printer. Connect the printer to your computer using the included hub.* Make sure all required supporting software and drivers are installed successfully and are working properly.

USB2.0 Hub

Note: The printer and disc autoloader must both be connected to your PC using the included hub in order for the RoboJet Disc Autoloader Software to work properly.