Installation
Minimum Hardware and Software Requirements
It is recommended that you operate your new RoboJet RoboJet Disc AutoPrinter with Continuous Ink System with PC systems that exceed the minimum hardware requirements to ensure smooth and efficient operation.
Pentium III 1GHz, 1GB DRAM (2GB DRAM recommended) Windows 7, XP, Vista, 2000 SP4
Available USB2.0 port
Operation
Do not move any part of the RoboJet Disc AutoPrinter with Continuous Ink System during operation. This may cause it to malfunction during operations.
Avoid exposing RoboJet Disc Autoloader to sudden changes in temperature as condensation may form inside. Operating the RoboJet Disc AutoPrinter immediately after a sudden increase in temperature may result in damage.
Transportation
Keep the original packing materials for future moving or shipping of the RoboJet Disc AutoPrinter with Continuous Ink System.
WARNING
When transporting the included printer, be sure to follow the included transportation instructions EXACTLY. These instructions can be found in the printer guides and included materials. FAILURE TO FOLLOW
THESE INSTRUCTIONS EXACTLY WHEN TRANSPORTING THE PRINTER WILL VOID THE WARRANTY FOR THIS PRODUCT.
Aleratec does not recommend shipping the printer for any reason once it has been filled with ink unless it is being shipped to Aleratec for service with an approved RMA number (provided by Aleratec Technical Support.)
6www.aleratec.com