Aleratec 360105 19

Using the RoboJet Disc AutoPrinter

Powering on the Printer

The design of the printer does not allow for it to power on properly with a disc tray attached. Because of this, the disc autoloader is designed with a physical “Printer Mode Switch” that can be used to simulate the absence of the disc tray. Whenever the printer is powered on, the Printer Mode Switch must be in the paper mode which is indicated by a paper icon indicating the switch position. Once the printer has initialized and shows a steady green light on its power button, then the Printer Mode Switch can be pushed forward to the disc icon position, which signals to the printer that discs are to be printed.

Printer Mode Switch Disc Position

Paper Position

1.Move Printer Mode Switch to paper position.