PC-7 FD 1⁄3 Hour Door
Algoma Hardwoods, Inc.
Solid lumber outer stiles along with Structural Composite Lumber (SCL) rails and inner stiles, are glued to the core prior to cold pressing a
Algoma Hardwoods, Inc uses only the better of two grades of door core particleboard conforming to ANSI Standard A208.1- 1989, Grade
Algoma Hardwoods, Inc. uses only skins with face veneers at least .020” (0.5mm) thick at 12% moisture content.
| Product Features |
|
|
|
|
Thickness | 13⁄4" (44mm) available FD 1⁄3 hour labeled. |
|
|
|
|
Maximum size | Available prefit up to 4'0" x 8'0" (1219 x 2743mm), 8'0" x 8'0" pairs. |
|
|
|
|
Stiles (Edge bands) | 13⁄8" (35mm) prior to factory trimming, glued to core. Alternates: |
|
|
|
|
Top & bottom rails | 13⁄8" (35mm) prior to factory trimming, glued to core; Structural Composite Lumber (SCL). |
|
|
|
|
Core | Conforms to ANSI |
|
|
|
|
Faces | Skins 0.10" (2.5mm) of several veneer species. Faces shall be a minimum of .020" (0.5mm) at 12% moisture content. |
|
|
|
|
Adhesives | Type II (interior). |
|
|
|
|
Veneer matching | Available in pairs. |
|
|
|
|
Details | Standard lites and louvers available not to exceed 40% of door area or 54" (1372mm) in length. Maximum glass opening on FD |
|
| 1⁄3 hour doors is 1,296 sq. in. (0836m2) with wood beads and clips or metal vision panels. Applied mouldings also available. |
|
|
|
|
Machining | Available with hinge and lock machining as well as other hardware. |
|
|
|
|
Finishing | Available in 8 standard colors, and clear. |
|
|
|
|
Warranty | For interior, limited lifetime warranty. Exterior not warranted. |
|
|
|
|
Standards met or exceeded | WDMA I.S. |
|
|
|
|
|
| 1001 Perry Street • Algoma, Wisconsin 54201 |
|
8/10/08 |
| 920.487.5221 • 1.800.678.8910 • FAX 920.487.3636 | Door 23 |
| |||
|
| www.algomahardwoods.com • sales@algomahardwoods.com |
|