Troubleshooting Electric Models | Allegro Industries 9850, 9832

T R O U B L E S H O O T I N G

ELECTRIC MODELS:

1)If motor fails:

•If motor is extremely cold.

o Bring to room temperature before starting.

•Ensure respirator and hose are connected when pump is running; failure to do so may cause lock-up. o Loosen all six pump endplate bolts slightly. Re-tighten and try to run unit.

•Some motors are thermally protected. An electrical overload or mechanical failure may cause a thermally protected motor to stop running.

o Let motor cool down (15-20 min.) and try restarting.

•If the motor fails to start or hums.

o Pull plug and check for correct electrical current as shown on motor nameplate. o Check the wiring instructions on motor case or on thermal plate cover.

•If electrical motor hums but the air pump is not turning.

o Turn off motor, loosen all six end plate bolts, then re-tighten and start unit. o If unsuccessful, remove endplate.

o Check vanes and rotor for free movement. o Broken or chipped vanes should be replaced.

•If rust has formed in pump chamber due to exposure to moisture. o Sand down if necessary.

o Clean chamber with approved solvents.

•If pump becomes noisy.

o Check for sticking vanes.

o Flush pump, if necessary replace vanes (see disassembly for instructions)

2)If output air hot or pump is running hot:

•If there is a drastic temperature increase on pump surface or air temperature coming out of the respirator. o Check alignment of pump rotor and housing. (see Maintenance section)

•If outlet pressure is too high.

o Adjust pressure relief valve, while maintaining sufficient air flow to the respirator.

•Check inlet and/or exhaust filter for excessive dirt or dust. o Replace if necessary.

•Check airline hose.

o Loosen hose coils to allow heat to dissipate. o Use NIOSH approved airline hose only.

o Do not use more than 100 feet of airline hose per respirator user.

o Joining separate lengths of airline hose to complete 100 feet will increase pressure and temperatures.

3)If there is a rise in outlet pressure:

•Check for kinked airline hoses.

•Make sure only NIOSH approved airline hoses are used

•Adjust pressure relief valve, to adjust for any change in number of users, or lengths of airline hose. o Check condition of filter elements.

o Replace if necessary.

9832, 9806, 9850, 9833, 9846 specifications

Allegro Industries is a renowned manufacturer, specializing in a range of high-performance portable ventilation systems that cater to various industrial needs and environments. Among their celebrated offerings are the models 9821, 9846, 9833, 9850, and 9806, each designed with unique features that enhance productivity and safety in the workplace.

The model 9821 stands out due to its lightweight portable design, making it ideal for use in confined spaces or remote locations. This model boasts a powerful motor that generates a high volume of air movement, ensuring a steady flow of fresh air even in the most challenging environments. Additionally, it incorporates a rechargeable battery option, providing convenience and flexibility for users without direct access to power sources.

In contrast, the Allegro 9846 model is engineered for heavy-duty applications. It is equipped with a robust construction that can withstand the rigors of industrial workloads. Its high-efficiency fan system is designed to deliver maximum airflow while consuming minimal energy. This model is particularly effective in large spaces where effective ventilation is essential for maintaining air quality and worker safety.

The 9833 model takes a different approach by integrating advanced filtration technologies. This model includes a multi-stage filtration system that effectively captures dust, pollutants, and other airborne particles, making it suitable for environments that require clean air standards. The compact design allows easy transport and setup, ensuring it can be deployed swiftly when needed.

Model 9850 is designed for versatility, featuring a modular design that allows users to customize airflow parameters according to their specific requirements. With dual fan capabilities and the option for daisy chaining multiple units, this model is perfect for both small and expansive operations. Its intuitive controls make it user-friendly, allowing operators to adjust settings quickly while ensuring optimal performance.

Lastly, the 9806 model emphasizes durability, featuring a rugged casing that protects internal components from damage in harsh industrial settings. It offers adjustable speed settings, allowing users to tailor airflow intensity based on the task at hand. This model is particularly well-suited for construction sites, manufacturing facilities, and emergency response applications.

Overall, Allegro Industries’ range of ventilation systems exemplifies cutting-edge engineering, providing effective air movement solutions for diverse industrial applications. Each model showcases a combination of technology, portability, and user-focused features, reinforcing Allegro's commitment to enhancing workplace safety and productivity.

Allegro Industries 9850, 9832, 9821, 9806, 9833, 9846 Troubleshooting Electric Models, If motor fails

Models: 9832 9806 9850 9833 9846 9821