AllerAir A8PK7025 warranty Hepa & Carbon Filters Order Guide, Refiling the Carbon Canister

HEPA & CARBON FILTERS ORDER GUIDE

These replacement filters will extend the life of your AllerAir unit. Please be sure to follow the instructions for changing the filters in your unit.

We recommend changing pre-filters every two months, HEPA filters every three to five years, and carbon filters every two years.

Order Reference Numbers

Please use the numbers in the chart when placing your order.

Call AllerAir at 1-888-852-8247 during regular business hours (EST) or send an e-mail to info@allerair.com

HEPA Filter Order Guide

REFILING THE CARBON CANISTER

Your AllerAir unit contains two filters.The carbon filter is the smaller, innermost one.

Tools required:

Philips screwdriver, garbage bag large enough to hold all of the old carbon, rubber mallet.

* Please note that this is a messy, dust-producing job, so select attire and site for the task accordingly.

AllerAir makes a special funnel to evenly refill carbon filters.

Call 1-888-852-8247 during regular business hours (EST) or e-mail to order.

Models	8000
Exec, Vocarb	A8FH0411

NOTE: Please use the above part numbers when ordering your replacement parts

Microparticulate Electrostatic Filter Order Guide

Models	8000
D Models
DX Models	A8FMR002
DS Models

NOTE: Please use the above part numbers when ordering your replacement parts This is the filter that wraps around any D, DX, DS or MCS carbon filter.

Replacement Carbon Filter Order Guide*

STEP 1

Remove the carbon filter from the unit by pressing thumbs against the inner rim and pulling up.

STEP 4

Pour in the new carbon, using a funnel if desired. As you pour, tap the sides of the filter with the rubber mallet to help settle the carbon granules.

STEP 2

Gently pull back the pre-filter to access the four screws at the top of the filter. Remove the screws with a Philips screwdriver and take off the lid of the filter.

STEP 5

When the filter is full, replace the lid and its screws. Adjust the pre-filter, and gently slide the filter back into the unit.

STEP 3

Discard all of the old carbon. Pour it into a garbage bag of adequate size and tie the bag shut.

STEP 6

Replace the felt gasket. Replace the base of the unit. Align the arrow on the base's gold sticker with the unit's seam, and replace the four screws with a Philips screwdriver.

Models	8000
Exec Models 2.5"**	A8FCB325
Vocarb Models 2.5"**	A8FCB225
D Exec Models 3"	A8FCB330
D Vocarb Models 3"	A8FCB230
DX Exec Models 3.5"	A8FCB335
DX Vocarb Models 3.5"	A8FCB235
DS Models 3"

*Please use the above part numbers when ordering your replacement parts.

If you have ordered a special blend of carbon in the past please let us know about it when ordering the replacement

**Please refer to your carbon filter depth when ordering a replacement

4

Order Reference Numbers

Empty Carbon Canisters Order Guide*

	Models	8000	Notes
	2.5" Canister**	A8FC1501	Exec and Vocarb models
	D Models	A8FC0503
	DX Models	A8FC1503
	*Please use the above part numbers when ordering your replacement parts.
	*Please consult the Bulk Carbon Order Guide
	*Please refer to your carbon filter depth when ordering a replacement
Bulk Carbon Order Guide*
	Models	4000	Notes
	Exec Mix	AM000911
	Vocarb Mix	AM000912
	Tobacco Smoke Mi	AM000901
	Special Blend Mix		please call	5
	*Please use the above part numbers when ordering your replacement parts

AllerAir Industries Inc.Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com AllerAir Industries Inc.Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com