| A Message for the Client |
FILTER | The model you have selected is shipped in 2 separate boxes to protect certain |
| |
| components. The filter comes in one box, and the outer shell of the unit, |
ASSEMBLY | containing the motor and the fan, comes in another. Filters must be installed |
D, DS, DX & | before turning the unit on in order for it to work. AllerAir technicians |
recommend removing the base, installing the filter, and replacing the base |
| A Message for the Client |
FILTER | The model you have selected is shipped in 2 separate boxes to protect certain |
| |
| components. The filter comes in one box, and the outer shell of the unit, |
ASSEMBLY | containing the motor and the fan, comes in another. Filters must be installed |
D, DS, DX & | before turning the unit on in order for it to work. AllerAir technicians |
recommend removing the base, installing the filter, and replacing the base |
6000 MODELS
according to the following steps:
6000 MODELS
according to the following steps:
Step 1
Make sure the unit is set to "Off," and unplug it. Lay the unit upside down, so that the wheels face up.
Step 2
Using a #2 Philips screwdriver, remove the four screws that hold the base onto the unit.
Step 3
Grasp the wheels. Remove the base by pulling gently on the wheels.
Step 1 |
| Step 2 |
| Step 3 |
Make sure the unit is set to "Off," |
| Using a #2 Philips screwdriver, |
| Grasp the wheels. Remove the base |
and unplug it. Lay the unit upside |
| remove the four screws that hold |
| by pulling gently on the wheels. |
down, so that the wheels face up. |
| the base onto the unit. |
|
|
|
|
|
|
|
Step 4
Reach inside the unit, and remove only 1 of the 2 felt pads.
HEPA
NEW
CARBON
Step 5
Gently insert the carbon filter
(either a Model D, DS or DX Carbon) into the unit, either end up.
For 6000 Carbon/Hepa Models
Insert carbon canister, then Hepa in center
Step 6
Put back the felt pad removed in
STEP 4.
Step 4
Reach inside the unit, and remove only 1 of the 2 felt pads.
HEPA
NEW
CARBON
Step 5
Gently insert the carbon filter
(either a Model D, DS or DX Carbon) into the unit, either end up.
For 6000 Carbon/Hepa Models
Insert carbon canister, then Hepa in center
Step 6
Put back the felt pad removed in
STEP 4.
Step 7 |
| Step 8 |
| Step 9 |
Replace the base, making sure the |
| Replace the four screws. |
| Turn the unit back onto its wheels. |
arrow on the gold sticker lines up |
|
|
| It is now ready for use. |
with unit's rear seam. |
|
|
|
|
|
|
|
|
|
Step 7
Replace the base, making sure the arrow on the gold sticker lines up with unit's rear seam.
Step 8
Replace the four screws.
Step 9
Turn the unit back onto its wheels. It is now ready for use.
Docs_on_Pdf/Filter_assembly/New_with_6000 June 2007
AllerAir Industries Inc.Toll free:
AllerAir Industries Inc.Toll free: