Steam Requirements
(Steam Heat Option Only)
WARNING
Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam must be turned off and the pipe, connections, and components allowed to cool before the pipe can be touched.
SW014
Installation
For machines equipped with optional steam heat, install piping in accordance with approved commercial steam practices. Steam requirements are shown in the table below.
Note: Failure to install the supplied steam filter may void the warranty.
| Steam Supply Information | |
|
|
|
Steam inlet connection, in. (mm) |
| 1/2 (DN13) |
|
|
|
Number of steam inlets |
| 1 |
|
|
|
Recommended pressure, psi (bar) |
| 30 – 80 (2.0 – 5.5) |
|
|
|
Maximum pressure, psi (bar) |
| 80 (5.4) |
|
|
|
29
F232058