Alliance Laundry Systems F232179R5 Table of, Contents

Table of

Contents

Model Identification ...........................................................................	2
Safety Information..............................................................................	3
Explanation of Safety Messages...........................................................	3
Important Safety Instructions ...............................................................	3
Operator Safety.....................................................................................	5
Entering Program Mode .......................................................................	6
Determining Firmware ID Code...........................................................	6
Setup Mode (For Models With Firmware ID Code
“o2UC”, “ouUC”, “o2HC” and “ouHC”) ......................................	6
Cycle and Error Count ..........................................................................	7
Setup Mode (For Earlier Models) ....................................................	7
Cycle and Error Count ..........................................................................	8
Programming Cycle Segments.........................................................	9
Options for Each Segment ....................................................................	10
To Edit an Entire Wash Cycle Formula................................................	18
Wash 1 – Wash 4 .............................................................................	18
Rinse 1 – Rinse 4 .............................................................................	19
Abnormal Conditions............................................................................	21
Door Open During Operation ..........................................................	21
Excessive Fill Time..........................................................................	21
Out of Balance .................................................................................	21
Clogged Filter (C80 Models Only) ..................................................	21
Door Will Not Open.........................................................................	21
Excessive Drain Time ......................................................................
“o2UC”, “ouUC”, “o2HC” and “ouHC”) ......................................	21
Temperature Probe Sensor Problem ................................................	21
Clean Fan LED On...........................................................................	22
Rapid Advance (For Models With Firmware ID Code
“o2UC”, “ouUC”, “o2HC” and “ouHC”) ......................................	22
How to Rapid Advance During All Steps
(Except First Fill Step) ...................................................................	22
How to Rapid Advance (During First Fill Step ...............................	22
Test Cycle .............................................................................................	22
Cycle Charts for Domestic OPL
(For Models Build After April 2005).................................................	25
Cycle Charts for Domestic OPL
(For Models Built Before April 2005) ...............................................	28
Cycle Charts for International OPL......................................................	31

© Copyright 2008, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.

F232179 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1