WARNING
To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electric power source.
W082
Grounding Instructions
The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The washer is equipped with a cord having an
WARNING
Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the washer is properly grounded.
W216
DO NOT modify the plug provided with the washer – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE: Have a qualified electrician check the polarity of the wall receptacle. If a voltage reading is measured other than that illustrated, the qualified electrician should correct the problem.
WARNING
This unit is equipped with a
W213
Installation
13
| 2 |
120 ± 12 | 0 |
V.A.C. | V.A.C. |
5
120 + 12
V.A.C.
4
STANDARD 120 VOLT, 60 HERTZ,
EFFECTIVELY GROUNDED CIRCUIT
D799I
1L1
2Ground
3Neutral Side
4Round Grounding Prong
5Neutral
Figure 16
DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT. DO NOT OVERLOAD CIRCUITS!Do not operate both a washer and gas dryer on the same circuit. Use separately fused 15 Amp circuits.
WARNING
To reduce the risk of electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.
W031
800971 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 13 |